View PNA1601M_1297177.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Phototransistors
PNA1601M (PN166)
Silicon NPN Phototransistor
For optical control systems Features
High sensitivity Wide spectral sensitivity, suited for detecting various kinds of LEDs
12.51.0 0.8 0.5 max. Gate the rest
Unit : mm
1.40.2 1.20.2 (0.4)
2.60.2 C0.5 0.8 R0.55
2.0 0.7
2.50.2 1.7
Ultraminiature, thin side-view type package
2-0.7
2-0.45
0.15
2
1 2.0
Absolute Maximum Ratings (Ta = 25C)
Parameter Collector to emitter voltage Collector current Collector power dissipation Operating ambient temperature Storage temperature Symbol VCEO IC PC Topr Tstg Ratings 20 20 50 -25 to +65 -30 to +85 Unit V mA mW C C
1: Collector 2: Emitter
Electro-Optical Characteristics (Ta = 25C)
Parameter Dark current Sensitivity to infrared emitters Peak sensitivity wavelength Acceptance half angle Rise time Fall time Collector saturation voltage
*1 *2
Symbol ICEO SIR tr*2 tf*2 VCE(sat)
*1
Conditions VCE = 10V VCE = 10V, H = VCE = 10V Measured from the optical axis to the half power point VCC = 10V, ICE(L) = 5mA RL = 100 ICE(L) = 10A, H = 15W/cm2 15W/cm2
min 3
typ
max 0.2
Unit A A nm deg. s s
P
850 35 4 4 0.5
V
Measurements were made using infrared light ( = 940 nm) as a light source. Switching time measuring circuit
Sig.IN VCC (Input pulse) Sig.OUT (Output pulse) 90% 10% td tr tf td : Delay time tr : Rise time (Time required for the collector photo current to increase from 10% to 90% of its final value) tf : Fall time (Time required for the collector photo current to decrease from 90% to 10% of its initial value)
;;; ; ;;
50
RL
Note) The part number in the parenthesis shows conventional part number.
1
Phototransistors
PNA1601M
PC -- Ta
60 2.0
ICE(L) -- VCE
Ta = 25C T = 2856K L = 1000 lx 10
ICE(L) -- L
ICE(L) (mA)
VCE = 10V Ta = 25C T = 2856K
PC (mW)
50
ICE(L) (mA)
1.6
1
Collector power dissipation
40
Collector photo current
Collector photo current
1.2
30
10 -1
500 lx 0.8
20
10 -2
10
0.4
0 - 20
0
20
40
60
80
100
0
0
4
8
12
16
20
24
10 -3
1
10
10 2
10 3
Ambient temperature
Ta (C )
Collector to emitter voltage
VCE (V)
Illuminance
L (lx)
ICEO -- Ta
10 VCE = 10V 10
ICE(L) -- Ta
VCE = 10V T = 2856K 100
Spectral sensitivity characteristics
VCE = 10V Ta = 25C
ICE(L) (mA)
ICEO (nA)
1
1
S (%) Relative sensitivity
0 40 80 120
80
Dark current
10 -1
Collector photo current
60
40
10 -1
10 -2
20
10 -3 - 40
0
40
80
120
10 -2 - 40
0 600
700
800
900
1000 1100 1200
Ambient temperature
Ta (C )
Ambient temperature
Ta (C )
Wavelength (nm)
Directivity characteristics
0 100 90 80 70 60 50 40 30 20 10 20 10 3
tr -- ICE(L)
VCE = 10V Ta = 25C 10 3
tf -- ICE(L)
VCE = 10V Ta = 25C
Relative sensitivity S (%)
30
10 2
10 2
tr (s)
tf (s)
40 50 60 70 80 90
10
RL = 1k 500 100
10
RL = 1k 500 100
Rise time
Fall time
1
1
10 -1
10 -1
10 -2 10 -2
10 -1
1
10
10 2
10 -2 10 -2
10 -1
1
10
10 2
Collector photo current
ICE(L) (mA)
Collector photo current
ICE(L) (mA)
2
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR
This datasheet has been download from: www..com Datasheets for electronics components.

▲Up To Search▲

Price & Availability of PNA1601M

	To Download PNA1601M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .